One way relay module, time delay power cut off, trigger delay cycle timer circuit switch.

One way relay module, time delay power cut off, trigger delay cycle timer circuit switch.
0.1 second (min) ~999 min (max) continuous tunable

This product is easy to use, powerful, but please look at the detailed operation of this product instructions, very practical products.

Module highlights:

1. wide voltage power supply (6~30V) supports micro USB 5.0V power supply, which is very convenient to use.

2. the interface is clear and simple, powerful, easy to understand, almost meet all your needs.

3., there is one button emergency stop function (STOP key), with reverse connection protection, reverse connection without burning.

4. Increased sleep mode, enabled, within 5 minutes without any operation, automatically shut down the display; arbitrary button wake-up;

5. Different OP, CL and LOP parameters can be set, which are independent of each other and are saved separately.

6. all settings are automatically powered down and saved.

Working mode:

P1: After the signal is triggered, the relay turns on OP time and then disconnects; during OP time, the following operation is performed

P1.1: the signal is triggered again.

P1.2: the signal is triggered again and re timed.

P1.3: the signal is triggered again, the relay is disconnected, and the timer is stopped.

P-2: Give the trigger signal, after the relay disconnects the CL time, the relay turns on the OP time, and after the timing is completed, disconnects the relay.

P3.1: Give the trigger signal, after the relay turns on OP time, the relay disconnects CL time, and then circulates the above action, giving the signal again in the cycle, the relay disconnects, stops timing; the number of cycles (LOP) can be set;

P3.2: No trigger signal is needed after power on, relay turn on OP time, relay disconnect CL time, cycle the above action; Loop number (LOP) can be set;

P-4: Signal holding function if there is a trigger signal, time zero, the relay remains on; when the signal disappears, time OP after disconnecting the relay; time period, then a signal, time zero;

Product parameters:
1: working voltage: 6--30V supports micro USB 5.0V power supply.

2: Triggering Signal Source: High-level Triggering (3.0V-24V) Signal Ground and System Ground to Improve the Anti-jamming Ability of the System (or Self-Short Ground)

3: output capability: equipment that can control DC 30V 5A or less than 220v5A.

4: quiescent current: 20mA working current: 50mA

5: service life: greater than 100 thousand times; working temperature: -40 - 85 C; size: 6.2*3.8*1.7cm

6: With optocoupler isolation, enhance anti-interference ability, industrial grade circuit board, set parameters after power off forever

Memory.

Special attention: the relay output is a passive contact, no live output, control a line on and off the role.