quantity of electric charge monitor BB

Product Introduction:

The voltage display is used for 1s~8s lithium battery detection, and the voltage and total voltage of each core of the lithium battery are detected. Supports reverse connection protection.

It allows you to understand your battery's working status anytime, anywhere, so that the battery will not be caused by excessive or excessive damage.

Whether in the flight process or idle state, it can be plugged into the battery balance connector to understand the battery status.

No multimeter is more necessary Oh!

When the voltage is below the set value, the buzzer will ring, the red LED lantern flashes; The set value is 3.3V, press the key to change the voltage setting value, automatically save the user's current setting value.

Product Parameters:

1. For 1s-8s Lithium battery testing

2. Voltage detection accuracy: ±0.01V.

3. Group voltage Display range: 0.5v~4.5V

4. Total voltage display range: 0.5v~36v

5.1S Test mode voltage range: 3.7v~30v

6. Low voltage buzzer alarm mode 2s-8s

7. Alarm Voltage Setting Range: Off~2.7~3.8V

8. Size: 40 mm x 25 mm x 11 mm Weight: 9g

How to use it:

Turn the electrical positive upward (on a few side), inserted against their own, will be the battery of the white balance charge plug along the left side of the electric display of the pin inserted, the electric display will immediately BB Sound two, on the screen to show the number of jumps, if there is no response, will be balanced charger plug in the back. The other end of the electrical display has a small button that is used to set the alarm voltage of the electrical display.